LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Cherokee Sport, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Keyless Ignition Node >> Removal >> Removal

Module, Keyless Ignition Node: Removal: Removal

  1. Disconnect the negative battery cable.
  2. Remove the lower steering column opening trim. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .
  3. Remove the chin bezel located above the floor console. One fastener and snaps to console.
  4. Remove the four (4) screws that retain the keyless ignition node.
  5. Disconnect the harness connector and remove the keyless ignition node.
scientia non olet · About LEMON Manuals