Set Condition

Pressure Regulator Monitoring:  A failure is detected if one of the following conditions occur:

An short to ground failure is detected if the ASIC indicates a short to ground failure.

A short to battery or open circuit failure is detected if the ASIC indicates a short to battery or open circuit failure.

Solenoid Monitoring:  A failure is detected if one of the following conditions occur:

An short to ground or open circuit failure is detected if the ratio between the voltage at the solenoid valve and the output stages power supply is above a calibrated threshold.

A short to battery failure is detected if the ratio between the voltage at the solenoid valve and the output stages power supply is below a calibrated threshold.