LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System) >> Engine >> Fan, Cooling >> Removal >> Diesel

Fan, Cooling: Removal: Diesel

WARNING: This page is about a different variant/trim than selected.
Fig 1: Fan Shroud, Coolant Recover Bottle Hose & Bolts
GC0155075Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the radiator overflow hose (2) from fan shroud (1).
  3. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL for 3.6L.
  4. Remove the upper cooling fan mounting bolts (3).
  5. Remove the upper radiator seal.
    Fig 2: Electric Fan Jumper Harness
    GC0130722Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the electric fan wire harness connector (1) at the fan shroud.
  7. Remove bolts and the fan shroud by pulling upwards and away from the radiator.
scientia non olet · About LEMON Manuals