LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 ((Electronic Pedestrian Protection (EPP) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> U11A0-00-Lost Communication W/Center-Pedestrian Protection Satellite Acceleration Sensor >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

This DTC sets when the EPPM no longer receives notification of the status update from the center pedestrian protection satellite acceleration sensor. Once set, this DTC is latched for the entire ignition cycle. This code will set active if the loss of communication with the sensor has lasted for more then 2.5 seconds. This fault is latched for the full ignition cycle. The fault will go stored on the next key cycle upon the fault not setting for longer then 2.5 seconds.