LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 ((Electronic Pedestrian Protection (EPP) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> U1175-00-Lost Ignition Status Message >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The EPPM doesn't receive a vehicle ignition switch status signal from the Electronic Ignition System (EIS) over the CAN C bus for 25 seconds to set the active code. The EPPM receives a vehicle speed signal for over one second to recover and change to a stored code. The Airbag Warning Lamp (AWL) on while faulted condition is active.

scientia non olet · About LEMON Manuals