Drag Link (Knuckle Side)

Fig 1: Drag Link Adjustment

Courtesy of CHRYSLER GROUP, LLC

Thread the drag link socket into the adjuster. Tighten the adjustment sleeve bolt finger tight (1). Do not tighten to specs until after the toe set is complete.

Fig 2: Right Side Drag Link Nut At Knuckle
Courtesy of CHRYSLER GROUP, LLC
Install the drag link to the knuckle and tighten the nut to 85 N.m (63 ft. lbs.)
Install the tie rod end to the knuckle and tighten to 85 N.m (63 ft. lbs.).
Install the right side tire.
Lower the vehicle.
Set the toe. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .