LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> C211C-Ignition Run/Start Input Circuit Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The Drive Train Control Module (DTCM) will set this DTC if the Ignition Run/Start circuit voltage is less than the expected value for more than 30 seconds.

scientia non olet · About LEMON Manuals