Diagnostic Test

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

VERIFY IF THE DTC IS ACTIVE

NOTE:

Make sure the battery is fully charged before performing any diagnostic procedure.

With the scan tool, refer to the Network Review Screen to display a high level view of the vehicle communication network. Modules shown in red are problem areas.

Always diagnose any Body Control Module (BCM) DTCs first before proceeding.

Turn the ignition on.
With the scan tool, read DTCs.
Does the scan tool display this DTC as active?

Yes
- Refer to NO RESPONSE FROM BCM (BODY CONTROL MODULE) and perform the No Response from BCM (Body Control Module) diagnostic procedure.
No
- Refer to STORED LOST COMMUNICATION DTCS and perform the Stored Lost Communication DTC diagnostic procedure.