LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 ((Electronic Pedestrian Protection (EPP) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> B2722-00-EPPM Unlocked - All Deployment Disabled >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

This DTC will be set as active for all service replacement EPPM modules prior to the initialization procedure (EPPM locked). This DTC is Active within four to six seconds for the EPPM unlocked state at start up. The DTC will change from Active to non Active state immediately upon the EPPM state changing to locked. The EPPM module will not show this DTC as Stored. It will just not show the DTC in a Stored state. Supply voltage range is 9 - 16 volts.

scientia non olet · About LEMON Manuals