Steering System: Pump: Installation: 5.7L

Fig 1: Belt Driven Power Steering Pump

Courtesy of CHRYSLER GROUP, LLC

1. Position the power steering pump (1) and using the holes in the pulley for access, install 3 pump mounting bolts (5) and tighten to 23 N.m (17 ft. lbs.).
2. Install the pressure line (4) on the pump (1) and tighten the nut to 28 N.m (21 ft. lbs.).
3. Install the supply hose (3) on the pump (1).
4. Install the drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
5. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION, 5.7L
6. Fill and bleed the system with power steering fluid. Refer to STANDARD PROCEDURE .