LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Knock >> Removal >> 6.4L >> Right Side

Right Side

Fig 1: Knock Sensor & Electrical Connector
GC0080083Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle.
  2. Remove the knock sensor heat shield.
  3. Disconnect the knock sensor electrical connector (5).
  4. Remove the knock sensor retaining bolt(s) (2).
  5. Remove the knock sensor(s) (1) from the cylinder block.
scientia non olet · About LEMON Manuals