LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Compass Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Ignition System (Service Information)) >> Spark Plug >> Removal >> Removal

Spark Plug: Removal: Removal

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Coils
GC0082369Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Disconnect the electrical connectors from ignition coils.
    Fig 2: Ignition Coil Bolt
    GC0082370Courtesy of CHRYSLER GROUP, LLC
  3. Remove the ignition coil mounting bolt.
    Fig 3: Removing/Installing Ignition Coil
    GC0082371Courtesy of CHRYSLER GROUP, LLC
  4. Twist the ignition coil then pull straight up.
    Fig 4: Spark Plug Removed
    GC0082372Courtesy of CHRYSLER GROUP, LLC
  5. Remove the spark plug using a quality socket with a rubber or foam insert.
  6. Inspect the spark plug condition.