LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Compass Limited, AWD, Trans Mfr CD CVT2L >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Pump >> Power Steering Cooler >> Removal >> Removal - Diesel Engine

Removal - Diesel Engine

Fig 1: Power Steering Reservoir, Hose & Clamp
GC0138088Courtesy of CHRYSLER GROUP, LLC
NOTE:

Before proceeding, refer to WARNING .

  1. Siphon as much fluid as possible from the power steering fluid reservoir.
  2. Remove the hose clamp (3) attaching the power steering cooler to the hose (2) leading to the power steering reservoir (5).
    Fig 2: Identifying Cooler, Return Hose & Bolts
    GC0138087Courtesy of CHRYSLER GROUP, LLC
  3. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  4. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
  5. Remove the right headlamp unit.
  6. Remove the hose clamp attaching the fluid return hose (1) to the power steering fluid cooler line (4). Separate the return hose from the cooler line (4).
  7. Remove the clip (5) that attaches the power steering cooler line to the right frame rail.
  8. Remove the fasteners (3) holding the cooler lines to the lower radiator support.
  9. Remove the cooler lines (4) from the vehicle.
scientia non olet · About LEMON Manuals