LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Compass Limited, AWD, Trans Mfr CD CVT2L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 ((Transmission Control Module (TCM) - Electrical Diagnostics - Continuously Variable Transmission (CVT))) >> DTC Troubleshooting >> U1401-Implausible Engine Speed Signal Received >> Set Condition

Set Condition

WARNING: This page is about a different variant/trim than selected.

Condition one:  the below conditions must be present for the period of 5 seconds for the DTC to set:

Engine speed minus Input speed is greater than 1000 rpm for the period of 5 seconds.

Engine speed minus Secondary speed estimated ratio is greater than 1000 rpm for the period of 5 seconds.

Secondary speed multiplied by the estimated ratio minus the primary speed is less than 1000 rpm.

Condition two:  Engine speed is less than 450 rpm and the Input speed is greater than or equal to 1000 rpm for the period of 20 msec.