Section 38 (Overhead Console (Service Information)): Removal: Removal
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Using your fingertips, grasp the sides of the overhead console (1) and pull straight down evenly to disengage the three snap clips from the mounting bracket.
- Lower the overhead console (1) far enough to access the wire harness connector (2).
- If equipped, disconnect the courtesy lamps, infrared temperature sensor and power sunroof switch electrical connectors.
- Remove the overhead console (1) assembly from the vehicle.