LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Compass Limited, AWD, Trans Mfr CD CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Power Distribution) >> Fuse, IOD >> Installation >> Installation

Fuse, IOD: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

It is extremely important that the Ignition Off Draw (IOD) fuse is fully seated into the Totally Integrated Power Module (TIPM) fuse cavity. Failure to install the fuse correctly could result in erratic electrical systems behavior.

  1. Open the TIPM cover.
  2. Insert fuse J13 into the TIPM. Push fuse down until it is fully seated in the TIPM cavity.
  3. Close the TIPM cover.
scientia non olet · About LEMON Manuals