Gas Engine

Fig 1: Power Steering Assembly Components

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Before proceeding, refer to WARNING .

Siphon as much fluid as possible from the power steering fluid reservoir.
Remove the engine appearance cover.
Remove the pressure Hose (3) at the pump pressure port (5).
Remove the pressure hose routing bracket bolt (2) at the upper mount (8).

Fig 2: Pressure Hose Bracket To Heat Shield - 2.0L
Courtesy of CHRYSLER GROUP, LLC
All except 2.4L Engine with All-Wheel-Drive - Remove the pressure hose routing clamp bolt (1) at the exhaust manifold.

Fig 3: Pressure Bracket To Heat Shield - 2.4L
Courtesy of CHRYSLER GROUP, LLC
2.4L Engine with All-Wheel-Drive - Remove the pressure hose routing clamp bolt (1) at the exhaust manifold.

Fig 4: Return Hose AT Tube To Gear
Courtesy of CHRYSLER GROUP, LLC
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the return hose (1) at the return tube (2).

Fig 5: Hoses AT Left-Hand-Drive Gear
Courtesy of CHRYSLER GROUP, LLC
Remove the return tube (1) at the steering gear (3).
Remove the pressure hose (2) at the steering gear (3).

Fig 6: Hose Routing Bracket Screws At Crossmember
Courtesy of CHRYSLER GROUP, LLC
Remove the fasteners (1) securing the power steering hose routing clamps (2) to the crossmember.
Remove the power steering pressure hose from the vehicle.