Monitor Conditions

WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored:
Ignition on, TCM not in initialization phase, no input speed sensor 1 or 2 (N2-N3) DTCs, no CAN bus or ECM DTCs, no CAN engine speed signal or engine torque signal not implausible DTCs, engine speed greater than 450 RPM, no shift in progress, gear 1, 2, 3, 4 or 5 engaged, and the TCM torque converter status is SLIP