LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Compass Limited, AWD, Trans Mfr CD CVT2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Exhaust System - MK) >> Sensor, Exhaust Temperature >> Installation

Sensor, Exhaust Temperature: Installation

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
GC0138491Courtesy of CHRYSLER GROUP, LLC
  1. Install the Exhaust Gas Temperature (EGT) sensor (2). Tighten sensor to 25 Nm (221 lbf-in.).
  2. Connect the EGT sensor wire harness connector.
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals