PRNDL Fault Clearing Procedure: Notes
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- With the scan tool, erase Transmission DTCs.
- Cycle the ignition off, then start the vehicle.
- Firmly apply the brakes and shift into Overdrive.NOTE:
Vehicle must remain in Overdrive for at least 3.0 seconds.
- With the brakes firmly applied, shift slowly through all gears (PRNDL) as least three times, pausing momentarily in each gear.NOTE:
If all the PRNDL lights box individually then the error was cleared.
- Shift into park and turn the ignition off to the lock position.
- With the ignition on, engine not running, using the scan tool, read DTCs.