Arm, Pitman: Removal: Removal

Fig 1: Track Bar Frame Side

Courtesy of CHRYSLER GROUP, LLC

Raise and support the vehicle.
Remove the track bar retaining bolt (2) at the frame and lower the track bar (1).

Fig 2: Drag Link At Pitman Arm Separation
Courtesy of CHRYSLER GROUP, LLC
Remove the pitman arm (1) retaining nut at the drag link (3).
Using the Ball Joint Remover (special tool #9360, Remover, Ball Joint) (2) or equivalent, separate the pitman arm (1) from the drag link (3).

Fig 3: Pitman Arm Nut
Courtesy of CHRYSLER GROUP, LLC
Mark the steering gear (1) shaft and pitman arm (2) for installation reference.
Remove the pitman arm retaining nut (3).

Fig 4: Ball Joint Press & Pitman Arm
Courtesy of CHRYSLER GROUP, LLC
Using the Ball Joint Press (special tool #C-4150A, Press, Ball Joint) (1) or equivalent, remove the pitman arm (2) from the steering gear. Refer to ARM, PITMAN, REMOVAL .