LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transmission Control Module (TCM) - Electrical Diagnostics) >> DTC Troubleshooting >> P0748-Modulator Pressure Solenoid Circuit >> Set Condition:

Set Condition:

WARNING: This page is about a different variant/trim than selected.

When the Modulating Pressure Control Solenoid Valve is turned on and the Solenoid driver detects an error (the measured current is too different then the target current) or when the solenoid is off and a short to ground is detected.