Sensor, Air Temperature, Intake: Removal: Removal

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the engine cover (1).
   Fig 2: Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
3. Disconnect the electrical connector (1) from the inlet air temperature (IAT) sensor.
   Fig 3: View Of IAT Sensor Tab/O-Ring - 3.7L/4.7L/5.7L

   Courtesy of CHRYSLER GROUP, LLC
4. Clean dirt from the air inlet tube at the IAT sensor base.
5. Gently lift the small plastic release tab (3), rotate the sensor about 1/4 turn counter-clockwise and remove the sensor from the inlet air hose.
6. The IAT sensor O-ring (2) can be reused if not damaged.