3.6L Coolant Crossover

Fig 1: Coolant Outlet Housing, Water Pump & Bolts

Courtesy of CHRYSLER GROUP, LLC

Clean gasket sealing surfaces.
Install new gasket onto the coolant crossover.
NOTE:
The shorter M6 mounting bolts (2), bolt directly to the engine timing cover.
Hand tighten the M6 mounting bolts. Tighten the bolts in a criss-cross pattern to 12 N.m (106 in. lbs.).
Install the heater supply hose to the coolant crossover (1).

Fig 2: Drive Belt Tensioners & Assembly With Drive Belt
Courtesy of CHRYSLER GROUP, LLC
Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .

Fig 3: Thermostat Housing & Thermostat
Courtesy of CHRYSLER GROUP, LLC
Install the thermostat housing. Refer to THERMOSTAT, INSTALLATION .