LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Wheel, Steering >> Installation >> Installation

Wheel, Steering: Installation: Installation

NOTE:

Do not reuse the old steering wheel bolt (a new bolt must be used)

  1. Install steering wheel to the column
    NOTE:

    Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.

  2. Install the new steering wheel bolt. Tighten the bolt to 54 N.m (40 ft. lbs.).
  3. Reconnect the speed control electrical wiring.
  4. Install the drivers side air bag. Refer to AIR BAG, DRIVER, INSTALLATION .
scientia non olet · About LEMON Manuals