LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 ((Transmission Control Module (TCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> P0219-Engine OVERSPEED >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
MECHANICAL ENGINE PROBLEM
MECHANICAL TRANSMISSION PROBLEM
POWERTRAIN CONTROL MODULE (PCM)
TRANSMISSION CONTROL MODULE (TCM)

Always perform the NAG1 Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .

Engine Overspeed Limit (If Equipped)
3.0 L (Diesel) 4350 + 800 RPM
3.5 L 6400 + 500 RPM
3.7 L 6000 + 500 RPM
4.0 L 6000 + 500 RPM
5.7 L 5600 + 500 RPM
6.1L 6200 + 500 RPM