LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Removal >> Removal

Sensor, Accelerator Pedal Position: Removal: Removal

Fig 1: Accelerator Pedal - Without Accelerator Pedal Position Sensor
GC0085648Courtesy of CHRYSLER GROUP, LLC
NOTE:

The accelerator pedal and APPS (Accelerator Pedal Position Sensor) are serviced as a complete assembly including the bracket.

  1. Disconnect electrical connector (3) at APPS.
  2. Remove two accelerator pedal mounting bracket nuts (2).
  3. Remove accelerator pedal/APPS assembly (1) from vehicle.
scientia non olet · About LEMON Manuals