Module, Totally Integrated Power (TIPM): Removal: Removal

Fig 1: TIPM Positive Cable, Retaining Nut, & Mounting Stud

Courtesy of CHRYSLER GROUP, LLC

1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Open the Totally Integrated Power Module (TIPM) cover (4).
4. Remove the TIPM positive cable retaining nut (1) and remove the cable (2) from the mounting stud (3).
   Fig 2: Totally Integrated Power Module, Mounting Bracket & Mounting Tabs

   Courtesy of CHRYSLER GROUP, LLC
5. Using an appropriate flat bladed tool, depress the four mounting clips to disengage and remove the TIPM housing (1) from the TIPM bracket mounting tabs (3).
   Fig 3: TIPM Housing & Wire Harness Connectors

   Courtesy of CHRYSLER GROUP, LLC
6. Disconnect each of the seven TIPM wire harness connectors from the TIPM housing (2).
7. Remove the TIPM from the vehicle.