LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Arm, Upper Control >> Removal >> Left Side

Left Side

  1. Raise and support the vehicle.
  2. Remove the left side tire and wheel assembly.
    Fig 1: Upper Ball Joint Separation
    GC0085698Courtesy of CHRYSLER GROUP, LLC
  3. Remove the upper ball joint nut.
  4. Separate the upper ball joint from the steering knuckle (3) using remover (special tool #9360, Remover, Ball Joint) (2).
    Fig 2: Identifying Battery Tray, Power Center & Battery
    GC0085706Courtesy of CHRYSLER GROUP, LLC
  5. Lower the vehicle.
  6. Remove the battery. Refer to BATTERY, REMOVAL .
  7. Unclip the power center (2) and move it to the side out of the way.
  8. Remove the battery tray (1). Refer to TRAY, BATTERY, REMOVAL .
    Fig 3: Pivot Bolts
    GC0085709Courtesy of CHRYSLER GROUP, LLC
  9. Remove the upper control arm rear nut (2) by using a ratchet and extension under the steering shaft (3).
  10. Remove the upper control arm front bolt.
  11. Remove the upper control arm from the vehicle.
scientia non olet · About LEMON Manuals