3.7L Engine
| 1 - THERMOSTAT HOUSING |
| 2 - THERMOSTAT LOCATION |
| 3 - THERMOSTAT AND GASKET |
| 4 - TIMING CHAIN COVER |
WARNING:
Do not loosen radiator draincock with system hot and pressurized. Serious burns from coolant can occur.
Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse.
If thermostat (3) is being replaced, be sure that replacement is specified thermostat for vehicle model and engine type.
- Disconnect negative battery cable at battery.
- Drain cooling system. Refer to STANDARD PROCEDURE .
- Raise vehicle on hoist.
- Remove splash shield.
- Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
- Remove thermostat housing mounting bolts, thermostat housing and thermostat.