LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Liberty Limited Jet, 4WD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, 2.8L Diesel >> Sensor, Air Temperature, Intake >> Installation >> Installation

Sensor, Air Temperature, Intake: Installation: Installation

  1. Check condition of sensor O-ring and clean mounting.
  2. Lubricate sensor O-ring and sensor mounting hole with oil.
  3. Install the IAT/MAP sensor and securely tighten the bolt.
  4. Connect the IAT/MAP sensor harness connector.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals