Sensor, Crankshaft Position: Installation: Installation

Fig 1: Crankshaft Position Sensor & Bolt

Courtesy of CHRYSLER GROUP, LLC

1. Clean the area and bore around Crankshaft Position Sensor (CKP).
2. Install the CKP (2). Tighten bolt (1) to 6 N.m (53 in. lbs.).
   Fig 2: Crankshaft Position Sensor Wiring Harness Bracket & Bolts

   Courtesy of CHRYSLER GROUP, LLC
3. Install bolts (1) attaching the harness connector bracket (2) to oil pan and tighten to 8 N.m (71 in. lbs.).
   Fig 3: Crankshaft Position Sensor Connector

   Courtesy of CHRYSLER GROUP, LLC
4. Connect the CKP harness connector (1).
5. Install the flex plate. Refer to FLEXPLATE, INSTALLATION or FLEXPLATE, INSTALLATION, 5.7L or FLEXPLATE, INSTALLATION .
6. Connect the negative battery cable.