Sending Unit And Sensor, Fuel Level: Installation: Installation

Fig 1: Retaining Tabs & Plastic Locking Tab

Courtesy of CHRYSLER GROUP, LLC

1. Position the fuel level sending unit to the fuel pump module, slide unit on mounting track until the plastic locking tab (3) snaps into position.
2. Route the fuel level sending unit wires into the retaining tabs (1, 2) on the fuel pump module.
   Fig 2: Sending Unit Electrical Connectors

   Courtesy of CHRYSLER GROUP, LLC
3. Connect the fuel level sending unit electrical connectors (1, 2) to the fuel pump module.
4. Install the main fuel pump module. Refer to MODULE, FUEL PUMP, INSTALLATION  or MODULE, FUEL PUMP, INSTALLATION .