Steering System: Pump: Removal: 6.4L

Fig 1: Air Inlet, Connector & Clamps

Courtesy of CHRYSLER GROUP, LLC

Remove the serpentine drive belt. Refer to BELT, SERPENTINE, REMOVAL .
Disconnect the electrical connector (2).
Loosen the clamps (1) and remove the air inlet (3) for access.

Fig 2: Power Steering Pump, Pressure Hose & Return Hose
Courtesy of CHRYSLER GROUP, LLC
Siphon power steering reservoir (1).
Disconnect the return line (2) from the integrated reservoir.
Disconnect the pressure line (3) from the power steering pump.

Fig 3: Power Steering Pump Pulley & Bolts
Courtesy of CHRYSLER GROUP, LLC
Using the holes in the pulley (2) for access, remove the three pump mounting bolts (1) and remove the pump from the vehicle.
Remove and transfer any necessary components.