LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Pump >> Removal >> 3.0L Diesel

3.0L Diesel

  1. Siphon the power steering reservoir.
  2. Disconnect and isolate the battery negative cable. Refer to CABLES, BATTERY, REMOVAL .
  3. Disconnect the two EHPS pump electrical connectors and the wiring harness to bracket routing clip.
  4. Disconnect the supply and return lines from the EHPS pump.
  5. Remove the pressure and return line routing clip bolt from the pump bracket.
  6. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  7. If equipped, remove the front skid plate. Refer to PLATE, SKID, FRONT, REMOVAL .
  8. Remove the pressure line retaining bolt and line from the EHPS pump.
  9. Loosen the routing clip retaining bolt and position the pressure line aside for access to remove the pump.
  10. Remove the three EHPS pump retaining bolts and remove the pump from the vehicle.
  11. Remove and transfer any necessary components.
scientia non olet · About LEMON Manuals