LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Power Liftgate (Service Information)) >> Latch, Liftgate >> Removal >> Removal

Latch, Liftgate: Removal: Removal

WARNING: This page is about a different car, the 2011 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Liftgate, Screws & Liftgate Latch, Connector, Wire Harness
GC0145970Courtesy of CHRYSLER LLC
  1. Open the liftgate.
  2. Disconnect and isolate the battery negative cable.
  3. Remove the lower trim panel from the inside of the liftgate (2). Refer to PANEL, TRIM , REMOVAL .
  4. Remove the three screws (5) that secure the power liftgate latch (1) to the lower shut face of the liftgate.
  5. Disconnect the connector (4) of the liftgate wire harness (3) from the pigtail wire connector of the latch.
  6. Remove the latch from the inside of the liftgate.
scientia non olet · About LEMON Manuals