Coil, Ignition: Removal: 5.7L/6.4L

Fig 1: Ignition Coil, Connector & Mounting Bolts

Courtesy of CHRYSLER GROUP, LLC

Remove the engine cover.
Disconnect the electrical connector (1) from the coil (3).
Clean the area at the base of the coil with compressed air before removal.
NOTE:
The ignition coil mounting bolts are retained in the ignition coil.
Remove the two ignition coil mounting bolts (2).

Fig 2: Removing/Installing Ignition Coil
Courtesy of CHRYSLER GROUP, LLC
Carefully pull up the ignition coil (1) from the valve cover.
Remove ignition coil (1) from vehicle.