Sensor, Differential Pressure: Removal: 6.4L

Fig 1: Differential Pressure Sensor (DPS) Metal Tubing Fitting, DPS Electrical Connector, DPS Hose & Bolt

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Raise and support vehicle.
3. If equipped, remove the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION, REMOVAL .
4. If required, remove the Differential Pressure Sensor (DPS) metal tubing fitting (4).
5. Disconnect the DPS electrical connector (2).
6. Disconnect the DPS hose (3).
7. Remove the bolt (1) with the DPS.
8. Remove the DPS from the bracket.