Pump, Water: Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.

Fig 1: Water Pump Pulley, Adapter And Gasket

Courtesy of CHRYSLER GROUP, LLC

Throughly clean all gasket mating surfaces before assembling.
Inspect water pump and components for any damage. Refer to PUMP, WATER, INSPECTION .
Using bolts (3), install the water pump (4) and gasket (8) to the water pump adapter (6). Tighten the bolts (3) to 22 N-m (16 lbs. ft.)
Using bolts (1), install the water pump pulley (2) to the water pump (4). Tighten the bolts (1) to 9 N-m (80 lbs. in.)
Using bolts (5), install the water pump assembly and gasket to the engine block. Tighten the bolts to 24 N.m (18 lbs. ft.). Refer to PUMP, WATER, INSTALLATION .
Start the engine and check for leaks. Refer to DIAGNOSIS AND TESTING .