LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Sport, 2.4 B, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Electronic Control Modules (Service Information)) >> Module, Electronic Shift >> Installation >> Installation

Module, Electronic Shift: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Shifter Wire Harness Connector
GC0170239Courtesy of CHRYSLER GROUP, LLC
  1. Position the shifter assembly in place and connect the shifter wire harness connector (1).
    Fig 2: Shifter Assembly & Bolts
    GC0170142Courtesy of CHRYSLER GROUP, LLC
  2. Install the shifter bolts (1) and tighten to the proper specification. Refer to SPECIFICATIONS .
    Fig 3: Bezel Panel & Trim Stick
    GC0170250Courtesy of CHRYSLER GROUP, LLC
  3. Install the shifter bezel panel (1).
    Fig 4: Shifter Bezel, Knob, Connector & Screw
    GC0170308Courtesy of CHRYSLER GROUP, LLC
  4. Install the shifter knob (2) and bezel (1).
  5. Install the shifter knob screw (4).
  6. Connect the shifter wire harness connector (3).
scientia non olet · About LEMON Manuals