LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Sport, 2.4 B, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Electronic Control Modules (Service Information)) >> Module, Active Damping Control >> Removal >> Removal

Module, Active Damping Control: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Active Damping Control Module, Screws & Connectors
GC0162427Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the left rear wheel well carpet. Refer to CARPET, REMOVAL .
  3. Disconnect the two wire harness connectors (1) and remove the four screws (2) from the Adaptive Damping Control Module (ADCM) (3).
  4. Remove the ADCM from the vehicle.
scientia non olet · About LEMON Manuals