LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal >> Gas Engine >> Coolant Adapter Mounted

Coolant Adapter Mounted

WARNING: This page is about a different variant/trim than selected.
Fig 1: ECT - World Engine - Coolant Adapter
GC0083975Courtesy of CHRYSLER GROUP, LLC
1 - ETC
2 - COOLANT ADAPTER
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor (1). Refer to STANDARD PROCEDURE .
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor (1) By pressing the locking tab down and turning the sensor counterclockwise.
scientia non olet · About LEMON Manuals