LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 720 (5.7L Engine (Service Information)) >> Manifolds >> Manifold, Intake >> Removal

Manifold, Intake: Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the fuel system pressure release procedure. Refer to FUEL SYSTEM PRESSURE RELEASE .
  2. Disconnect and isolate the negative battery cable.
  3. Remove the air cleaner body. Refer to REMOVAL  .
  4. Disconnect the fuel supply line. Refer to FITTING, QUICK CONNECT, STANDARD PROCEDURE .
  5. Disconnect the brake booster hose and the EVAP purge line.
    Fig 1: Intake Manifold Loosening Sequence
    GC0095568Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the following components wire harness connectors:
    • Manifold Absolute Pressure (MAP) Sensor
    • Fuel Injectors
    • Electronic Throttle Control (ETC).
  7. Using the sequence shown in illustration, remove bolts and the intake manifold.
scientia non olet · About LEMON Manuals