Sensor, Oil Temperature: Installation

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Apply Mopar® Thread Sealant with PTFE to the sensor threads before installing into the engine block.

Install the oil temperature sensor (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Connect the oil temperature sensor wire harness connector (1).
Install the generator. Refer to GENERATOR, INSTALLATION .
Connect the negative battery cable.