Body, Air Cleaner: Installation
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- While sliding the air duct onto the throttle body, lower the air cleaner housing (5) into position and align the locating pin on the bottom of the housing.
- Install the air cleaner body bolt (4) and securely tighten.
- Install the makeup air hose (3) at the air cleaner body.
- Connect the intake air temperature sensor wire harness connector (2).
- Install the air duct retaining clamp (1) at the throttle body and securely tighten.