LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 717 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Speaker >> Installation >> Shelf Panel

Shelf Panel

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0170821Courtesy of CHRYSLER GROUP, LLC
  1. Position the speaker (2) near the mounting hole in the package shelf panel support.
  2. Connect the wire harness connector (1) to the speaker.
  3. Position the speaker into the mounting hole of the shelf panel support.
  4. Install and tighten the fasteners (3) that secure the speaker to the shelf panel support. Tighten the fasteners securely.
  5. Install the trim to the shelf panel support. Refer to PANEL, REAR SHELF, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals