LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 717 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Speaker >> Installation >> Instrument Panel

Instrument Panel

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0170256Courtesy of CHRYSLER GROUP, LLC
  1. Position the speaker (2) near the mounting hole in the top of the instrument panel structural support (1).
  2. Connect the wire harness connector to the speaker and position it into the mounting hole of the instrument panel.
  3. Install the fasteners (3) that secure the speaker to the instrument panel structural support. Tighten the fasteners securely.
  4. Install the defroster grille. Refer to GRILLE, DEFROSTER, INSTALLATION .
  5. Connect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
scientia non olet · About LEMON Manuals