Shield, Rear Mount: Removal
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the four retaining screws (1) that secure the rear underbody shield/panel (2) to the rear fascia.
- Remove the ten retaining nuts (3) that secure the rear underbody shield/panel (2) to the tire tub area located forward of the rear fascia.
- Remove the rear underbody shield/panel (2) from the vehicle.