LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Speaker >> Removal >> Instrument Panel

Instrument Panel

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Support Structure, Speaker & Screws
GC0170256Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the defroster grille from the top of the instrument panel. Refer to GRILLE, DEFROSTER, REMOVAL .
  3. Remove the two screws (3) that secure the speaker (2) to the top of the instrument panel support structure (1).
  4. Pull the speaker out of the instrument panel far enough to access and disconnect the wire harness connector from the speaker.
  5. Remove the speaker from the instrument panel.
scientia non olet · About LEMON Manuals