LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 399 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Speaker >> Installation >> Instrument Panel

Instrument Panel

WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Support Structure, Speaker & Screws
GC0170256Courtesy of CHRYSLER GROUP, LLC
  1. Position the speaker (2) near the mounting hole in the top of the instrument panel structural support (1).
  2. Reconnect the wire harness connector to the speaker and position it into the mounting hole of the instrument panel.
  3. Install and tighten the two screws (3) that secure the speaker to the instrument panel structural support. Tighten the screws securely.
  4. Reinstall the defroster grille onto the top of the instrument panel. Refer to GRILLE, DEFROSTER, INSTALLATION .
  5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
scientia non olet · About LEMON Manuals